uv glue phone tempered glass screen protector so stick

The uv glue phone tempered glass screen protector is pasted in this way to reduce the risk of mobile phone damage

UV glue phone tempered glass screen protector is a mobile phone phone tempered glass screen protector that is attached by titrating UV glue first and then curing UV glue with ultraviolet light. Compared with conventional solid glue phone tempered glass screen protector, it has strong adhesion and is not easy to fall off. The advantages, especially the UV glue phone tempered glass screen protector for curved screens, are liked by many people.
Because of the use of glue to paste, this phone tempered glass screen protector also has disadvantages. One is that improper operation will easily generate air bubbles. The other is that the glue easily seeps into the volume keys and power keys on the edge of the phone, sticking the side keys or corroding the foam of the side keys, causing the side keys to fail and become unusable. Curved screen mobile phones are more prone to infiltration and accumulation of fluid due to the curvature of the screen edge.

If you must choose UV glue phone tempered glass screen protector, you can refer to the following operations to use:
The first step is very important, and it may cause damage to the phone if it is not done properly. First of all, before attaching the phone tempered glass screen protector, the holes and gaps on the outside of the phone, including side buttons, speaker holes, charging ports, etc., must be carefully sealed with adhesive strips.
After the first step is completed, put the phone on a non-slip mat, and wipe the screen clean with an alcohol-containing non-woven cloth.
After everything is ready, start dripping glue, and there are tricks for dripping glue:
The glue should be dripped in the middle of the screen, and it should be dripped in a long strip. Don't draw a circle, and don't drip all in the middle of the screen, so that the glue can easily flow out of the screen.
After the glue is dripped, gently put the phone tempered glass screen protector on it. At this time, you can fine-tune the position of the phone tempered glass screen protector according to the situation to align it with the screen. It should be noted that do not press the phone tempered glass screen protector. Be patient and let the glue spread naturally.
After the UV glue spreads to the whole screen, use a clean toilet paper to absorb the glue on the edge.

Dispose of the excess glue and irradiate it with the blue light provided by the merchant for about 2 minutes to cure the glue.
After the glue is cured, tear off the glue strip that blocked the hole, and the UV glue phone tempered glass screen protector is pasted successfully.